|
|
 |
Two models- feature packed to put holes in your work...not your wallet. Sink, Ram, "Z-Servo", Water Dielectric, Custom Work Table, and More...
The EDM DrillMate, today's solution to producing precision, high speed holes at an economical price. The EDM DrillMate's ability to use ordinary tap water as dielectric, coupled with a high pressure air system, provide for excellent flush and stability at the electrode during the burn. This makes set up and operation on most jobs more user friendly and keeps work free of oils or other contaminates.
The EDM Drillmate can incorporate electrodes from .008 up to .118 diameter. The conversion to oil dielectric for extremely fine cuts, such as .008, is easy to make if you choose.
The 35 Z2 offers a Power-Z Back Slide for additional travel to accommodate increased part thickness. And, with our patent pending "Z-Servo", the DrillMate affords the ability to stop the chuck spindle in place and "Sink" or "Ram" simple or detailed forms. |
 |
The heavy cast iron construction allows work piece weight capacity up to 500 lbs. A specially designed work table comes standard with tooling bolt configuration and two tooling rails for quick set up from job to job.
The tank area and components are constructed from stainless material providing for easy clean up and long life. Also standard are a submersible work tank and splash guards.
The user friendly control of both models allows simple input of all cutting variables including, On, Off, Servo, Capacitance Settings and Selective Peak Amperage.
Included is an audible edge find, voltmeter to monitor stableness of burn and a Programmable Digital Readout for ease of positioning.
The 50D control incorporates up to 100 programmable electrode settings with storage capability. This "learn-as-it-burns" technology adjusts current automatically to enhance breakthrough, decrease electrode wear and increase burn time efficiency.
Standard hand held remote aids operator during setup when close visual inspection is necessary.
- The Model 35-Z2 has a Power-Z Back Slide for additional travel to accommodate part thickness from .375 to 14 inches.
- Custom Designed Work Table of stainless steel construction with 8mm bolt holes on 50mm centers accommodates most wire and sinker EDM tooling. Submersible work tank and splash guards are standard.
- Control Panel integrates "Sink" or "Ram" function and Selectable Peak Amperage Settings to provide stability along with low electrode wear. Auto Retract is standard.
- Servo Rotation can be stopped to perform die sinking operations.
|
EDM DrillMate |
Model 30Z
w/50D Control |
Model 35Z2
w/50D Control
(Power-Z Backslide) |
| Machine Specifications |
| Table Travels (X-Y) |
13" x 8.4" |
13.7" x 10.4" |
| Worktank |
25.65" x 17.5" |
33.5" x 18" |
| Worktable Size |
18" x 8.25" |
23.6" x 11.8" |
| Min. Ram Height to Table |
.25" |
.375" |
| Max. Z Motor Axis Travel with Chuck |
13.5" |
13.5" |
| Max. Workpiece Weight |
220 lbs. |
500 lbs. |
| Max. Workpiece Height |
8.0" |
14.0" |
| Power Supply |
75 amps |
75 amps |
| Standard Equipment |
| Digital Readout - Precision Keyless Chuck (0-.118) - 1mm Die Guide - Ground Tooling Rails (accommodates most EDM tooling) - 1 Pk. 1mm Electrode Tubes - Halogen Worklight -Optional Filtration Unit. |
|
| |
Perseo-Erie stocks consumables for the Drillmate line (filters, electrode tubes, guides, etc.).
DEALER INQUIRIES WELCOME! |
|
|
